Real time biological threat monitor for early warning of bio-aerosol threats

The IBAC 2 is a continuously operating monitor that provides early warning of biological aerosol threats. The IBAC 2 facilitates the process of identifying bio-terror agents to allow timely containment, treatment and remediation. Monitors are designed to detect concentrated levels of biological aerosols. Possible agents released in a bio-threat attack can include bacterial spores, bacteria, viruses and toxins.

The IBAC 2 monitors can operate independently or as part of a network configuration to form the 'first tier' of a building air-security system. In addition to providing real time alerts to biological aerosol threats, it can trigger a secondary aerosol sampler for subsequent identification. Communication and response can be managed through existing building control systems or independent network.

Rugged design and high sensitivity allow the IBAC 2 to be deployed in severe environments such as HVAC systems and outdoor environments.

The unit is an affordable approach that offers a range of flexibility to protect high valued assets.

The IBAC 2 is a mature sensor with top-of-the-line sensitivity and low total cost of ownership. It is designed to run continuously in the background with minimal interaction. From long-term, fixed installations to short, mission-based tactical applications, the IBAC 2 offers a flexible field-ready solution for bio-aerosol monitoring.

  • Provides near real time warning capability for biological aerosol threats.
  • Government validated with over 3,000,000 hours of run time in relevant environments.
  • Alert can automatically trigger a particulate sampler for subsequent identification.
  • Operates unattended 24/7 without consumables.
  • Complete self-diagnostic system.
  • Battery or line powered with up to 16 hour run time per battery charge.
  • Easily integrated with most building monitoring and control systems.
  • Alert algorithms validated for both indoor and outdoor environments.

Bio-Threat Risk Mitigation

Since most biological agents have an incubation period of a few days to a few weeks, the key to minimizing harmful effects is to identify:

  1. When a release occurs.
  2. What biological material is present.
  3. Where is the location of the exposure.
  4. Who was exposed.

The IBAC 2 helps enable these four steps to occur quickly, thus making timely treatment and threat containment possible.

Detect-to-Warn Sensor Architecture

  • Near real time warning capability.
  • Allows early prophylactic treatment.
  • Minimizes building contamination via triggered HVAC measures.

Technology

Technology 

 UV Laser Induced Fluorescence (LIF)

Sampling & Analysis

Sample Introduction 

 Airborne particles; triggered aerosol sample collector

Sample Phase

 Aerosol; flow rate 4.0 L/min (0.14 ft3 /min)

Threats

 Spores, vegetative bacteria, viruses, and toxins; particle size: 0.7 – 10 microns

Sensitivity

 Sensitivity ​

Sampling & Analysis

 Continuous sampling 24/7/365; indoor/outdoor alarm settings; analysis time configurable down to 1 second

Sample Collection

 Integrated with DFU or C100 sample collector (see below)

System Interface

Display & Alerts

On-board LED for visual indication; full display via software on external computer

Communication

 Ethernet, RS-232; optional embedded wireless (900MHz or 2.4GHz)

Outputs

 Particle data, sensor diagnostics, bio-alarm, and fault

Data Storage

 Internal 2 GB MicroSD memory card; stores over 1 yr of data

Training Requirements

 ​​​<2hrs

Power

Input Voltage

 100-240 VAC (adapter supplied); 18-36 VDC

Power Consumption

20 watts (normal detector operation) 75 watts (with collector running)

Battery Specs

 Li-ion BB 2590 military battery; up to 14 hrs runtime; charge ​

Cold Start Time

 <5mins​

Environmental

Operating Temp

 -5 to 125 °F (-20 to 50 °C)

Operating Humidity

 5% to 95%, non-condensing

Storage Temp

 -40 to 160 °F (-40 to 70 °C)

Physical Features

Dimensions (L x W x H)

 9.5 x 6.5 x 9.0 in (24.0 x 16.5 x 22.9 cm) - without battery

Weight

 7.5 lbs (3.4 kg)

Enclosure & Protection

 Aluminum, IP66 weatherproof

Documents

Application Notes

The LabLogic Group will always treat your details with the utmost care and will never sell them to third party companies.

Please choose one of the following:



Previous
Next